Franklin Striping

Your parking lot is often the first impression customers have of your business. Faded, confusing lines lead to frustration, wasted space, and potential liability. Franklin Striping provides professional parking lot striping in Phoenix using high-quality paint that resists fading and wear. We lay out stalls, fire lanes, crosswalks, directional arrows, and handicap spaces according to local codes. Our process starts with a thorough site inspection, followed by precise layout and taping, then clean...

For high-traffic areas that demand extreme durability, thermoplastic striping in Phoenix is the solution. Unlike standard paint, thermoplastic is a heated, resin-based material that bonds directly to asphalt or concrete, creating a thick, long-lasting line that is highly reflective and skid-resistant. Franklin Striping applies thermoplastic for crosswalks, stop bars, highway legends, and parking lots subject to heavy vehicles. The process involves heating the material to precise temperatures, ap...

Outdated or incorrect pavement markings cause confusion and safety hazards. Grinding or sandblasting damages the pavement, but hydroblasting in Phoenix removes paint, thermoplastic, and tape safely — without harming the asphalt or concrete. Franklin Striping uses ultra-high pressure water jets (up to 40,000 psi) to blast away old markings, leaving a clean slate. The water and debris are contained and vacuumed, making the process environmentally friendly and leaving no residue. This method is ide...

Pavement markings guide drivers, pedestrians, and workers, so they need to be accurate and easy to see. At Franklin Striping, we handle pavement marking for businesses and sites in Phoenix, from small lots to large commercial properties. We start with a site inspection, lay out the markings to fit your traffic pattern, and apply them cleanly. Our work covers stop bars, crosswalks, arrows, legends, and handicap spaces. We have been doing this since 1996, and we take care of the layout details so...

A clear parking lot tells customers where to go and makes the most of your space. Our parking lot striping service covers stalls, fire lanes, crosswalks, directional arrows, and accessible spaces laid out to local code. We inspect the lot first, then tape and paint each line so the edges come out straight and the symbols stay crisp. We use low-VOC paint that holds up to Phoenix heat and sun. Whether you need a fresh coat on an existing lot or a new layout for a building project, we keep the work...

Thermoplastic is a heated, resin-based marking material that bonds to asphalt or concrete and forms a thick, reflective line. We use it where traffic is heavy and paint would wear out quickly, such as crosswalks, stop bars, and busy lots with large vehicles. The material is heated to a precise temperature, applied with screed equipment, and cooled into a durable surface with glass beads for night visibility. Many property managers choose thermoplastic because it can last several years before it...

When old or incorrect markings need to come out, hydroblasting removes them without damaging the surface beneath. We use high-pressure water, up to 40,000 psi, to strip away paint, thermoplastic, and tape from asphalt or concrete. The water and debris are contained and vacuumed, so the site is left clean. This method works well for re-striping, fixing layout mistakes, or clearing ghost lines before new markings go down. We have done this work across Phoenix, from parking garages to municipal roa...

Raised pavement markers are small reflective units set into the road surface to help drivers see lane edges and centerlines, especially at night or in rain. We install them on roadways and lots where extra guidance is useful. Each marker is positioned and bonded to the pavement so it stays put under traffic. Placement follows the layout of the road and the spacing your project calls for. If your site could benefit from added visibility beyond painted lines, we can look at the area with you and s...

Preformed thermoplastic tape is a ready-made marking material, pressed in a factory and then heat-bonded onto the pavement on site. It suits logos, symbols, and detailed shapes that are hard to create by hand. We lay the tape on a prepared surface, heat it to bond, and check the edges for a clean fit. Because the tape is made to a set thickness, it wears evenly and keeps its shape well. If you need a crisp symbol or a custom design on your pavement, tell us what you have in mind and we will let...

Paint is the most common material we use for pavement lines, and it works well for parking lots, drive aisles, and lanes that do not see heavy truck traffic. Our paint is low-VOC and chosen to resist fading in Phoenix sun. We prepare the surface, lay out the lines with care, and apply the paint evenly for sharp, uniform edges. Repainting is quick and can be scheduled to limit disruption to your business. For a fresh set of lines on a budget-conscious project, paint striping is a practical choice...

We are a line striping contractor serving Phoenix, with a focus on careful layout and clean work. Our crew handles the full job, from the initial site review and layout planning through painting and final inspection. We work on parking lots, roadways, and construction sites, and we adjust our approach to each property. Our process is straightforward: we listen to what you need, lay out the lines to match your traffic and code requirements, and finish with a check of every stripe. If you need a c...